[wellylug] Problems with Archlinux usb wireless.
Jeff Hunt
jeffhunt90 at gmail.com
Sat Oct 13 19:18:57 NZDT 2012
Thanks for the repsonse.
It sounds like good advice. I had assumed that because it ran out of
the box on Ubuntu it would not need extras on Archlinux but of course
Ubuntu may have firmware by default and the Archlinux instructions
include what to do to get it. But I didn't.
I will try the firmware option tomorrow so there is no pressure on at
the moment, but I send the output of the commands you asked for.
Many thanks.
On 13/10/2012, Daniel Reurich <daniel at centurion.net.nz> wrote:
> Hi Jeff,
>
> Chances are you will need to install the wireless firmware.
>
> Send the output of 'lsusb -vvv' and 'lspci -vvv' and we can figure out
> what type of wireless card it has built in and we can get that sorted
> for you.
>
> Cheers,
> Daniel.
>
>
>
> On 13/10/12 13:10, Jeff Hunt wrote:
>> Hello all,
>>
>> I am attempting to run an Archlinux computer with Ubuntu machines.
>> During the Archlinux install I ignored wireless and used ethernet
>> through a network machine. That works fine.
>> I contact the outside world through a huawei 2degrees usb modem
>>
>> Now I want to get the Archlinux computer wireless capable without
>> turning on another machine
>>
>> In the Archlinux machine I have mode_switch installed so
>> lsusb recognises the modem as Device [number] ID 12d1:140c Huawei
>> Technologies Co., Ltd.
>> the critical thing being the 140c which is a modem not a storage device.
>>
>> Now I'm told the driver is called usbserial
>> If I attempt to remove it with rmmod usbserial I get
>> Module usbserial is in use by: option usb_wwan
>> That has me at a loss. What is usb_wwan and if usbserial is present
>> why doesn't it work?
>>
>> The tutorials tell me to check all is well with iwconfig.
>> That gives me:>>
>> lo no wireless extensions
>> eth0 no wireless connections
>> but then I get nothing about wlan0 or anything else. i expect to see
>> wlan0 there.
>>
>> I have tried several internet sites for more ideas and tried using
>> 'modprobe usbserial vendor=0x12d1 product=0x140c' to stir it into life
>> but I have failed.
>>
>> I've tried to start wlan0 in startup files even though the system
>> doesn't know what that is. Not surprisingly it didn't work.
>>
>> My self esteem is in tatters.
>>
>> Help!!??!!
>>
>>
>
>
> --
> Daniel Reurich
> Centurion Computer Technology (2005) Ltd
> Ph: 021 797 722
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: x
Type: application/octet-stream
Size: 23627 bytes
Desc: not available
URL: <http://lists.wellylug.org.nz/pipermail/wellylug/attachments/20121013/47f3cd0a/attachment-0001.obj>
More information about the wellylug
mailing list