[wellylug] Mobile Multimedia Machine (MMM!)
Chris Harris
chris.harris at actrix.gen.nz
Tue Sep 30 20:43:19 NZST 2003
Hi jamie
have you considered the likes of:
http://www.ascent.co.nz/mn-product-spec.asp?pid=116719
E-Cube S968L, Mini Barebones Kit, Socket 478, Pentium 4, Intel 845GE, 533MHz FSB, DDR333, Audio, Video, 4XAGP, ATA-100, LAN, Firewire, USB 2
*Add RAM, CPU and Hard drive for a working system*
:
Specifications:
- CPU: Support Intel Socket 478 Pentium 4 processor / 400/533MHz Intel NetBurst
- Chipset: Intel 82845GE + ICH4 Chipset Winbond W83627HF LPC controllerRealtek RTL8100B Ethernet controllerNEC uPD720100AGM USB 2.0 controller NEC uPD72873GC 1394a
- Main Memory: Two 184-pin DIMM sockets Support DDR200/266/333 SDRAM up to 2GB
- VGA: Integrated Graphics controller in 845GE Support 3D/2D enhancementsSupport AGP8X bandwidth. Max. Bandwidth 2.1GB/secAITECH AIT2138 TV Hardware EncoderTV-out supporting upto 1027 x 768 graphic resolution
- Audio: AC-Link with AC'97 2.2 compliantSoftware audio with Realtek ALC650 6-channel AC'97 codec, S/PDIF output supported
- USB 2.0: NEC uPD720100AGM USB 2.0 controllerCompliant with USB 2.0 specificationSupport Hi-speed, Full-speed and Low-speed data transfer rate Max Bandwidth 480Mbits/s
- Ethernet: Realtek RTL8100B 10/100Base-T Ethernet controllerFull-Duplex supportedWFM 2.0 compliant
- 1394: NEC uPD72873GC 1394a Host ControllerData transfer rate 100/200/400Mbps
- I/O Interface: Winbond W83627HF LPC controllerTwo enhanced PCI IDE channels which support up to 4 IDE devices with ATA-100 transfers up to 100MB/sec Built in FDC supports 1.2M/1.44M/2.88M FDD
- Back Panel I/O Output: SPDIF-OUT optical connector, 2 Type A USB connectors, 1 RJ-45 LAN port, 1 S connector, 1 Composite connector, 2 1394 Vertical connectors, 1 Serial Port, 1 D-type 15-pin VGA connector, Line-in, MIC-in, Speaker-out, PS/2 mouse and keyboard connectors
- System BIOS: Award BIOS with 2MB/4MB EEPROMACPI/PnP supported
- Expansion Slots: 1 PCI slot, 1 AGP4X slot
- Form Factor: Flex-ATX @ 262 mm (L) × 180 mm (W), 6 Layers
- Front Panel I/O Output Board: SPDIF-In optical connector, Center/Bass, Rear-Out, Line-Out, MIC-In, 2 Type A USB connectors, 1 1394 connector
You would need to add a decent sound card, OS, CPU, RAM, DVD and HDD
or possibly http://www.ascent.co.nz/mn-product-spec.asp?pid=110204 etc
p.s I have no affiliation with Ascent, except as a customer
More information about the wellylug
mailing list