[wellylug] device names

[Ray Smith]

Thanks!
Ray

Check out www.scatteredsubjects.com


On Tue, Feb 23, 2010 at 9:05 PM, jumbophut <jumbophut at gmail.com> wrote:

> If you have the right drivers loaded (the saa7134 kernel module is the
> one you want), you should be able to pass /dev/video0 as the device.
>
> To be sure, check your kernel logs ('dmesg | grep -A 3 -B 3 -i
> saa7134' from the command line will hopefully turn something up).
>
> If you don't have the right drivers loaded, that's where you'll need to
> start.
>
> More info here: http://linux.bytesex.org/
>
> Tony
>
> On 2/22/10, Ray Smith <nazgul748 at gmail.com> wrote:
> > Hello,
> > I'm trying to set VLC to record video from a capture card. When I use the
> > lspci command it recognizes the card as:
> >
> > *00.0b.0 Multimedia Controller: Philips Semiconductors SAA7131/ SAA7133/
> > SAA7135 Video Broadcast Decoder (rev. f0)*
> >
> > How do I tell VLC the name of the device?
> >
> > Thanks,
> > Ray
> >
>
>
> --
> Tony (echo 'spend!,pocket awide' | sed 'y/acdeikospntw!, /l at omcgtjuba.phi
> /')
>
>
> --
> Wellington Linux Users Group Mailing List: wellylug at lists.wellylug.org.nz
> To Leave:  http://lists.wellylug.org.nz/mailman/listinfo/wellylug
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.wellylug.org.nz/pipermail/wellylug/attachments/20100223/e776013a/attachment.htm